Olympus DP80 Instructions Manual page 27

f
g
h
i
To PCIe board
When the FDD power cable is not available (or if it is not long enough)
1 Connect the HDD (4 pin)-FDD power conversion cable
HDD power cable (4 pin)
2 Insert the cable described in 1 to the power connector
PCIe I/F board .
b
When both FDD power cable and HDD power cable are not available
1 Connect the SATA-HDD (4 pin) power conversion adapter
provided with this product to the SATA power cable
2 Connect the HDD (4 pin)-FDD power conversion cable
cable described in 1.
3 Insert the cable described in 2 to the power connector
PCIe I/F board b .
} Be sure to insert the cable connector firmly as far as it will go.
5
Close the housing of the desktop PC.
of the PC.
f
h
DP80
g to the
on the
e
i
of the PC.
g to the
on the
e
23