Preparing The Remote Control; Power Supply; Using The Ac Adaptor - Panasonic DVD-LV57 Operating Instructions Manual

Preparing the remote
control
Insert the battery
(Lithium battery)
1
∫ Replacing the button-type battery
The battery normally lasts for about a
year. Replace if the remote control fails to
operate the unit when used within the
operation range.
Note
Refer to
INSTRUCTIONS" on pages 6 and 7.
Operation range
Remote control
signal sensor
About 7 m
(23 feet) in
front of the
signal sensor
Note
≥Do not expose the remote control signal
sensor to bright light.
≥Do not place obstacles between the
remote control signal sensor and the
remote control.
10
≥Do not use another unit's remote control
at the same time.
RQT6077
2
3
Face + upwards.
"IMPORTANT SAFETY
30° 30°

Power supply

Using the AC adaptor

DC IN 9V
% DC IN 9 V
1
This unit (Left side)
2
The [Í] indicator lights.
Note
Refer to "IMPORTANT
INSTRUCTIONS" on page 6.
The unit is in the standby condition
(the [Í] indicator lights) when the AC
adaptor is connected. The primary cir-
cuit is always "live" as long as the AC
adaptor is connected to an electrical
outlet.
∫ When the unit is not going to be
used for a long time
The unit consumes 2 W when in standby
mode.
To conserve power, disconnect the AC
adaptor from the AC outlet.
Household AC
outlet
(AC 120 V, 60 Hz)
Front of
this unit
SAFETY