Linked Operations With The Tv (Viera Link "Hdavi Control Tm "); Easy Control Only With Viera Remote Control - Panasonic DMP-BD10A Operating Instructions Manual

Playback
11 Linked operations with the TV
Linked operations with the TV
(VIERA Link "HDAVI Control
What is VIERA Link "HDAVI Control"?
VIERA Link "HDAVI Control" is a convenient function that offers linked operations of this unit, and a Panasonic TV (VIERA) or amplifier/receiver
under "HDAVI Control". You can use this function by connecting the equipment with the HDMI cable. See the operating instructions for connected
equipment for operational details.
Preparation
1. Connect this unit to your TV or amplifier/receiver with an HDMI
cable (➡ 8–9).
2. Set "Control with HDMI" to "On" (➡ 23).
(The default setting is "On".)
3. Set the "HDAVI Control" operations on the connected equipment
(e.g., TV).
≥When using HDMI2 terminal of VIERA as "HDAVI Control",
set the input channel to HDMI2 on VIERA.
4. Turn on all "HDAVI Control" compatible equipment and select this
unit's input channel on the connected TV so that the "HDAVI
Control" function works properly.
Also when the connection or settings are changed, repeat this
procedure.
What you can do with "
One touch play
You can turn on this unit, television and amplifier/receiver, and start
playing the disc in the play position with a single press of a button.
Press [ONE TOUCH PLAY].
≥When operating, point the remote control at the remote control
signal sensor on the main unit.
≥When [ONE TOUCH PLAY] or [1] (PLAY) is pressed on this unit
for "Automatic input switching" or "Power on link", the playback
image is not immediately displayed on the screen and it may not
be possible to watch the contents from where playback started.
In this case, press [:] or [6] to go back to where playback
started.
Automatic input switching
When the following operations are performed the television will
automatically switch the input channel and displays the
corresponding action.
– When play starts on the unit
– When an action that uses the display screen is performed
(e.g., Direct Navigator screen)

Easy control only with VIERA remote control

If you connect this unit to the TV that has "HDAVI Control 2" function with an HDMI cable, you can operate this unit using the following buttons on
the TV remote control.
[3, 4, 2, 1], [OK], [RETURN], [EXIT], [OPTION] and the coloured buttons.
Use the remote control for this unit to operate any other buttons (numbered buttons, etc.) that are not listed above.
≥Refer to the TV operating instructions for operating TV.
Using the OPTION menu window to operate this unit
By using the TV remote control, you can play discs using the
"Control Panel" (➡ below) and display the Top Menu (for BD-Video
and DVD-Video) or Pop-up Menu (for BD-Video).
1
Press [OPTION].
This can also be displayed by using the VIERA menu screen.
e.g.
Control Panel
Control Panel
Top Menu
[BD-V] [DVD-V]
Top Menu
Menu
Pop-up Menu
[DVD-V]
ENTER
Pop-up Menu
RETURN
[BD-V]
Rotate RIGHT
[JPEG]
Rotate LEFT [JPEG]
Zoom in [JPEG]
Zoom out [JPEG]
[Note]
You cannot use the OPTION menu while the Top Menu for
BD-Video or DVD-Video is displayed.
2
Select an item then press [OK].
RQT8966
18
TM ")
HDAVI Control
"
Control Panel is displayed
(➡ right).
Top menu is displayed
(➡ 15).
Menu is displayed
(➡ 15).
Pop-up menu is displayed
(➡ 15).
Rotate the still picture
(➡ 17).
Enlarge or shrink the still
picture (➡17).
≥VIERA Link "HDAVI Control", based on the control functions
provided by HDMI which is an industry standard known as HDMI
CEC (Consumer Electronics Control), is a unique function that we
have developed and added. As such, its operation with other
manufacturers' equipment that supports HDMI CEC cannot be
guaranteed.
≥This unit supports "HDAVI Control 2" function.
"HDAVI Control 2" is the newest standard (current as of February,
2007) for Panasonic's HDAVI Control compatible equipment. This
standard is compatible with Panasonic's conventional HDAVI
equipment.
≥It is recommended that you use Panasonic's HDMI cable.
Recommended part number:
RP-CDHG15 (1.5 m), RP-CDHG30 (3.0 m), RP-CDHG50 (5.0 m),
etc.
≥Non-HDMI-compliant cables cannot be utilized.
Power on link
When the television is off and the following operations are
performed, the television will automatically turn on and displays the
corresponding action.
– When play starts on the unit
– When an action that uses the display screen is performed (e.g.,
Direct Navigator screen)
Power off link
All connected equipment compatible with "HDAVI Control"
including this unit is automatically set to standby mode when you
set the television to standby mode.
≥This unit is automatically set to standby mode even during
playback or any other operation.
≥Only this unit is set to standby mode when you press the standby/
on button of the unit or the remote control for shutting it down.
Other connected equipment compatible with "HDAVI Control"
stays on.
Using the Control Panel
Using the Control Panel, you can operate search backward, search
forward, stop, etc, with the TV remote control.
Perform steps 1 and 2 of "Using the OPTION menu window to
operate this unit" (➡ left).
The Control Panel is displayed (➡ right).
≥When playing BD-Video or DVD-Video, etc.
–[3]: Pause, [4]: Stop, [2]: Search
backward, [1]: Search forward, [OK]: Play,
[EXIT]: Exit the screen.
≥While playing still pictures
–[4]: Stop, [2]: View previous picture,
[1]: View next picture, [EXIT]: Exit the
screen.
∫ When you want to leave the TV on and set only this unit
to standby mode
Press [Í BD] on this unit's remote control and set to standby
mode.
∫ When not using "HDAVI Control"
Set "Control with HDMI" in the Setup menu to "Off" (➡ 23)
Control Panel
Pause
Exit
Search
Search
Play
Stop