Noble House Home Furnishings Rocking Chair Assembly Instructions Manual page 9

Step 5
Place the Rocking Chair on a LEVEL SURFACE.
Inspect the Rocking Chair and make sure all parts are connected.
Gently and gracefully, sit into to the Rocking Chair.
This would help to align all the parts at all the joint areas.
Then get out of the Rocking Chair and in a sequential manner, proceed to tighten all
Screws. Whenever moving or lifting the Rocking Chair be sure to secure assistance
from your adult partner(s).
When tightening any Screws, tighten sequentially.
DO NOT tighten any Screw fully and then move on towards the next one.
If there are still wobbles after tightening, loosen the Bolts and Screws and execute
this same process.
WARNING!! IF Rocking Chair IS NOT STABLE , IT COULD LEAD TO DAMAGING
THE PRODUCT.
Ensure all screws are fully locked into position.
Your Rocking Chair is ready for use.
This Rocking Chair can only be only be used on a flat, lever surface.
Noble House Home Furnishings LLC
Page 9 of 10