Summary of Contents for Noble House Home Furnishings Club Chair
Page 1
Assembly Instructions Caution: You must read this before you proceed Club Chair Parts List Label Picture Description Backrest Panel Seat Base Back Left Side Back Right Side Page 1 OF 6 Noble House Home Furnishings LLC...
Page 2
FRONT FACING Leg (F) This Club Chair has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Club Chair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Page 3
Plastic Washer (②) and tighten by turning the leg clockwise. Repeat the same steps to install the remaining three legs(F). Do not fully tighten the Legs. Step 3 Seat Base (B) Stand the Seat Base(B) up. Page 3 OF 6 Noble House Home Furnishings LLC...
Page 4
Push firmly down on Back Left Side (C) and Back Right Side (D) to esure they are fully locked into position. Press the Back Left Side (C) and the Back Right Side (D) forcefully to ensure that they are fully locked in place. Page 4 OF 6 Noble House Home Furnishings LLC...
Page 5
Gently and carefully, sit on the Club Chair. This pressure will help the Legs and Seat Base reach full alignment status. Then get off the Club Chair and carefully place the Club Chair facedown. Then proceed to tighten all Bolts at all joints in a sequential manner.
Page 6
Stains may be removed with mild soap solution and ● damp cloth. Children should not climb or jump on the furniture. ● Dust and pick-up spills using a clean, non-colored, ● lint-free cloth. Noble house Home Furnishings LLC Page 6 OF 6...
Need help?
Do you have a question about the Club Chair and is the answer not in the manual?
Questions and answers