Table of Contents
Advertisement
TCD440_445AL(E).book Page 23 Monday, May 24, 2004 1:17 PM
5
Press {v} repeatedly to select "ON" or
"OFF", then press {>}.
6
Press {ih}.
Other options
Changing the handset PIN (Personal
Identification Number)
The handset's default PIN is "0000".
Important:
L If you change the PIN, please write down
your new PIN as the unit will not reveal the
PIN to you. If you forget your PIN, consult
your nearest Panasonic service centre.
1
Press {j}.
2
Press {v} repeatedly to display
"SETTING HS", then press {>}.
3
Press {v} repeatedly to display "OTHER
OPT", then press {>}.
4
Press {v} repeatedly to display "HSPIN
CHANGE", then press {>}.
5
Enter the current 4-digit handset PIN.
6
Enter the new 4-digit handset PIN.
7
Enter the new 4-digit handset PIN again.
8
Press {ih}.
Setting auto talk
This feature allows you to answer calls
simply by lifting the handset off the base
unit. You do not need to press {C}.
1
Press {j}.
2
Press {v} repeatedly to display
"SETTING HS", then press {>}.
3
Press {v} repeatedly to display "OTHER
OPT", then press {>}.
4
Press {v} repeatedly to display "AUTO
TALK", then press {>}.
5
Press {v} repeatedly to select "ON" or
"OFF", then press {>}.
6
Press {ih}.
Useful Telephone Settings
Setting the battery type
"NI-MH": Select when nickel metal hydride
batteries are installed.
"NI-CD": Select when nickel cadmium
batteries are installed.
1
Press {j}.
2
Press {v} repeatedly to display
"SETTING HS", then press {>}.
3
Press {v} repeatedly to display "OTHER
OPT", then press {>}.
4
Press {v} repeatedly to display
"BATTERY TYPE", then press {>}.
5
Press {v} repeatedly to select the
desired setting, then press {>}.
6
Press {ih}.
Resetting the handset to its default
settings
1
Press {j}, {v}, {>}, {e} and {>}.
2
Enter "0000" (default handset PIN).
L If you changed PIN, enter it (page 23).
3
Press {v}, {>} and {ih}.
Note:
L For the default settings, see page 19.
L Phonebook entries will not be erased.
L The battery type setting will not be reset.
23
Advertisement
Table of Contents
