Table of Contents
Advertisement
3
Chapter
Configuring the Controller for the OpenVMS
Operating System
This chapter describes how to initially configure the controllers for compatibility with the
OpenVMS operating system.
Some preliminary configuration is necessary to setup your controllers to work with the
OpenVMS operating system. This configuration procedure, explained in detail in this
chapter, is done through the controllers' Command Line Interpreter (CLI).
Controller Terminology
The controllers in a dual-redundant pair are referred to as "controller A" and "controller
B." CLI commands frequently refer to "this controller" and "other controller." The
meaning of these designations is presented below.
Advertisement
Table of Contents
