Configuring And Updating The System; Rapid Startup - Compaq 230050-001 - StorageWorks NAS B3000 Model N900 Server Installation Manual

[Enter your Document Title]
Configuring and
Updating the
System

Rapid Startup

NOTE: In a cluster configuration, from this point forward, the first node will be referred
to as NODE A and the second node will be referred to as NODE B.
The Rapid Launch utility allows an administrator to configure the nodes network
configurations from a client before the Quick Restore process. The configuration is saved
to a floppy, which may be inserted into the node during the Quick Restore process. This
is an optional configuration method, and if a floppy has not been inserted then a screen
will appear with three options when the Quick Restore is completed. If a diskette was not
created select IGNORE and then CONTINUE, select YES to complete the utility.
Download and install the StorageWorks NAS Cluster Setup Tool update from the
following link:
http://h18006.www1.hp.com/support/files/server/us/download/14994.html
Download and install the Compaq StorageWorks NAS Services For Unix version 2.3
and WebUI update from the following link:
http://h18006.www1.hp.com/support/files/server/us/download/15012.html
This will reboot the node.
After the reboot has completed navigate to C:\sfu23. Right click on info.inf and select
install.
Download and install the StorageWorks NAS Data Copy fix for uninstall problem from
the following link:
http://h18006.www1.hp.com/support/files/server/us/download/17535.html
Install SP3 or any other hot fixes required to be installed.
Note: At the link above, there are other software updates available that do not apply
to this configuration. Install only the items specifically mentioned here. Do not install the
SWVR patch 1, SWVR patch 2 or the Compaq StorageWorks Virtual Replicator Service
Patch 116B. They are all installed with the image. The Compaq SANworks Virtual
Replicator Update will be applied later in the configuration. (SoftPaq 2829)
Note: Complete this process on both nodes.
From a remote node, open an Internet Explorer session and navigate to the WEBUI for
StorageWorks NAS. The WEBUI is accessible through the hostname and port 3201. For
example http://hostname:3201.
The Rapid Startup Utility is provided to allow a quick setup of the network connections.
The Rapid Startup Utility will be the first page displayed when the WEBUI is opened.
Rapid Startup will allow for the configuration of all network adapters and the Remote
Insight Board. The Rapid Startup Utility is accessible through the WEBUI.
1. Click on the Internet Explorer icon in the fast start tray. Navigate to
http://hostname:3201. A prompt for a username and password will appear.
The user name is administrator, there is no password. The password is the same
password that is used for the local administrator account on the server, so if the
password has been changed for the local administrator's account it must also be
used to login into the WEBUI.
2. Complete the Rapid Startup by filling in the appropriate information in the fields
provided.
3. Once rapid start is complete the node will reboot.
[Document Restriction Notice]
4