NL Troubleshooting
Malfunction
Program does not start.
Door cannot be
opened.
Washing water is not
pumped out.
46
Cause and Troubleshooting
Close the door.
1.
To start the program, press Start/Refill
2.
.
Child lock is activated.
→ "Deactivate child lock", page 34
▶
- Ready in + is activated.
Check if - Ready in + is activated.
▶
→ "Buttons", Page 24
Laundry is wedged in the door.
Open the door again.
1.
Remove trapped laundry.
2.
Close the door.
3.
To start the program, press Start/Refill
4.
.
is activated.
Resume the program by Centrifuge or Drain to
▶
choose and press Start/Refill
know.
→ "Resume program at rinse hold", page 33
Temperature is too high.
Wait for the temperature to drop.
▶
→ "program cancel", Page 33
▶
Water level is too high.
Select a suitable program for draining.
▶
→ "Programs", Page 26
Power cut.
Open the door with the emergency release.
▶
→ "Emergency release", page 52
Drain pipe or water drain hose is clogged.
Clean the drain pipe and the water drain hose.
▶
Drain pipe or water drain hose is kinked or
pinched.
Make sure that the drain pipe and the water
▶
drain hose are not kinked or pinched.
Drain pump is clogged.
→
"Cleaning the drain pump", page 39
▶
is activated.
too busy-