Table of Contents
Advertisement
Malfunction
burns.
flashes.
All other error codes.
"E:30/-20"
Device not working.
Program does not start.
Cause and Troubleshooting
Temperature is too high.
Wait for the temperature to drop.
▶
→ "program cancel", Page 33
▶
Water level is too high.
Select a suitable program for draining.
▶
→ "Programs", Page 26
Laundry is wedged in the door.
Open the door again.
1.
Remove trapped laundry.
2.
Close the door.
3.
To start the program, press Start/Refill
4.
.
Door is not closed.
Close the door.
1.
To start the program, press Start/Refill
2.
.
Malfunction
Please contact customer service.
▶
→
"Customer Service", page 53
Solenoid valve defective.
Please contact customer service.
▶
→
"Customer Service", page 53
Detergent dosage is too high.
Reduce the amount of detergent for the next wash
▶
with an equal load.
Additional water filled.
▶ Do not fill the device with additional water during
operation.
Mains plug of the power cable is not plugged in.
Connect the appliance to the mains.
▶
The fuse in the fuse box has tripped.
Check the fuse in the meter box.
▶
Power supply has failed.
Check whether the interior lighting or other
▶
appliances are working.
Start/Refill
Press Start/Refill
▶
Door is not closed.
Troubleshooting NL
was not pressed.
.
45
Advertisement
Table of Contents
