Table of Contents
Advertisement
Quick Links
Advertisement
Chapters
Table of Contents
Related Manuals for Bosch WAXH2E0LSN
Summary of Contents for Bosch WAXH2E0LSN
- Page 1 Washing machine WAXH2E0LSN [en] User manual and installation instructions...
-
Page 2: Table Of Contents
Futher information and explanations are available online: Table of contents 1 Safety .......... 4 6 Before using for the first time ... 20 1.1 General information.... 4 6.1 Starting an empty washing cycle ......... 20 1.2 Intended use....... 4 1.3 Restriction on user group... 4 7 Display ........ - Page 3 14 Childproof lock...... 38 20 Transportation, storage and disposal ........ 60 14.1 Activating the childproof lock ......... 38 20.1 Removing the appliance .. 60 14.2 Deactivating the childproof 20.2 Inserting the transit bolts.. 60 lock ......... 38 20.3 Using the appliance again .. 60 20.4 Disposing of old appliance .. 61 15 Intelligent dosing system ..
-
Page 4: Safety
en Safety 1 Safety Observe the following safety instructions. 1.1 General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. 1.2 Intended use Only use this appliance: ¡... -
Page 5: Safe Installation
Safety en 1.4 Safe installation WARNING ‒ Risk of electric shock! Incorrect installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Connect the appliance to a power supply with alternating cur- rent only via a properly installed socket with earthing. ▶... - Page 6 en Safety WARNING ‒ Risk of injury! The high weight of the appliance may result in injury when lifted. ▶ Do not lift the appliance on your own. If this appliance is not correctly installed in a washer-dryer stack, the installed appliance may fall. ▶...
-
Page 7: Safe Use
Safety en ▶ Wear protective gloves when installing and transporting the ap- pliance. 1.5 Safe use WARNING ‒ Risk of electric shock! If the appliance or the power cord is damaged, this is dangerous. ▶ Never operate a damaged appliance. ▶ Never pull on the power cord to unplug the appliance. Always unplug the appliance at the mains. - Page 8 en Safety WARNING ‒ Risk of poisoning! Detergents and care products may result in poisoning if con- sumed. ▶ If accidentally swallowed, seek medical advice. ▶ Keep detergents and care products out of the reach of children. WARNING ‒ Risk of explosion! Laundry that has been pretreated with cleaning agents that con- tain solvents may cause an explosion in the appliance.
-
Page 9: Safe Cleaning And Maintenance
Safety en 1.6 Safe cleaning and maintenance WARNING ‒ Risk of electric shock! Incorrect repairs are dangerous. ▶ Repairs to the appliance should only be carried out by trained specialist staff. ▶ Only use genuine spare parts when repairing the appliance. ▶ If the power cord of this appliance is damaged, it must be re- placed by the manufacturer, the manufacturer's Customer Ser- vice or a similarly qualified person in order to prevent any risk. -
Page 10: Preventing Material Damage
en Preventing material damage Make sure that the length of the ▶ 2 Preventing material thread on the connection to the water tap is at least 10 mm. damage If the water pressure is too high or too low, the appliance may not be ATTENTION! able to operate properly. -
Page 11: Environmental Protection And Saving Energy
Environmental protection and saving energy en Remove all detergent residue, Reduce the washing temperature for ▶ spray residue or other residues im- lightly and normally soiled laundry. mediately if they come into contact a At lower temperatures, the appli- with the appliance. ance consumes less energy. -
Page 12: Energy Saving Mode
en Installation and connection 3.3 Energy saving mode 4.2 Contents of package If you do not use the appliance for an After unpacking all parts, check for extended period, it automatically any damage in transit and complete- switches to energy-saving mode. ness of the delivery. Energy-saving mode ends when you ATTENTION! use the appliance again. - Page 13 Installation and connection en Installation loca- Requirements WARNING tion Risk of injury! When using the appliance on a base, Kitchen unit Only install the the appliance may tip over. appliance under- Always secure the feet of the appli- neath a continu- ▶...
- Page 14 en Installation and connection Unscrew and remove all the Put on the 4 cover caps. screws for the 4 transit bolts with a WAF 13 wrench. Push the 4 cover caps downwards. Remove the power cable from the holder. Note: To install the transport locks to transport the appliance, perform these steps again in the reverse or- Remove the 4 sleeves.
-
Page 15: Removing The Transport Struts
Installation and connection en Remove the transport strut. 4.5 Removing the transport struts Unscrew and remove the screws in the vertical transport struts using a T20 screwdriver. 4.6 Connecting the appliance Connecting the water inlet hose WARNING Remove the transport struts. Risk of electric shock! The appliance contains live parts. -
Page 16: Aligning The Appliance
en Installation and connection When connecting to a 21 mm = ½" Sink Fix and secure tap, first fit the adapter with a seal- the water outlet ing washer. hose with an el- bow. Plastic pipe with Fix and secure rubber sleeve or the water outlet gully hose with an el-... -
Page 17: Connecting The Appliance To The Electricity Supply
Installation and connection en To align the appliance, turn the ap- The connection details of the appli- pliance feet. Check that the appli- ance can be found under Tech- ance is level using a spirit level. nical data → Page 64. Check the mains plug is inserted properly. -
Page 18: Detergent Drawer
en Familiarising yourself with your appliance 5 Familiarising yourself with your appliance 5.1 Appliance You can find an overview of the parts of your appliance here. On certain models, specific details such as the colour and shape may differ from those pictured. Maintenance flap for the drain Transit bolts → Page 13 pump → Page 46 Water inlet hose → Page 15... -
Page 19: Control Panel
Familiarising yourself with your appliance en Manual dosing compartment / : Dispenser for fabric softener or liquid detergent : Dispenser for liquid deter- gent 5.3 Control panel You can use the control panel to configure all functions of your appliance and to obtain information about the operating status. Programmes → Page 29 Programme selector → Page 35... -
Page 20: Operating Logic
en first time 5.4 Operating logic In addition to the actual functions of the buttons on the display, you can also use these buttons to select pro- gramme settings in the main menu and settings in the sub-menus. Main menu To select programme settings, press the buttons above or below the sym- bols. - Page 21 first time en Add washing powder to the manual dosing compartment. To prevent foaming, use only half of the amount of detergent recom- mended by the detergent manufac- turer for light soiling. Do not use detergent suitable for woollens or delicates. Push in the detergent drawer.
-
Page 22: Display
en Display 7 Display The display shows the current settings, options or relevant information. Example: Display Display Designation More information 0:40 Programme dura- Expected programme duration or pro- tion/programme gramme time remaining in hours and time remaining minutes. 10 h "Ready in" time → "Buttons", Page 26 10.0 Recommended... - Page 23 Display en Display Designation More information Saving the pro- Save a programme → Page 36. gramme Set other programmes → Page 35. Other pro- grammes Childproof lock ¡ lights up: The childproof lock is activ- ated. ¡ flashes: The childproof lock is activated and the appliance has been operated. → "Deactivating the childproof lock", Page 38 Crease-reduction...
- Page 24 en Display Display Designation More information Tomato The stain type is activated. Energy consump- Energy consumption for the selected pro- tion gramme. : Low energy consumption ¡ : High energy consumption ¡ Water consump- Water consumption for the selected pro- tion gramme.
- Page 25 Display en Display Designation More information Dosage:_ 50% Dosing recom- The recommended dosage for detergent, mendation if intelligent dosage has been deactivated. Note: The dosing recommendation indic- ates the load capacity that should be used for the relevant detergent dosage. The percentage refers to the maximum load capacity for the programme.
-
Page 26: Buttons
en Buttons 8 Buttons With the button, you can open the sub-menu for additional programme set- tings. The additional programme settings are listed in the overview for the but- tons. The selection of programme settings depends on the programme that is set. Button Selection More information... - Page 27 Buttons en Button Selection More information 0 - 1600 Adjust the spin speed or deactivate (Spin Speed Re- the spin cycle. duction) Set spin speed in rpm. If 0 is selected, the water is drained and the spin cycle is deactivated. The laundry stays wet inside the drum.
- Page 28 en Buttons Button Selection More information Rinse Hold ¡ Activate Activate or deactivate spinning and draining at the end of the washing ¡ Deactivate cycle. The laundry remains in the water after the last rinse cycle. → "Resuming the programme when the programme status is Rinse Hold", Page 37 Silent Wash ¡...
-
Page 29: Programmes
Programmes en 9 Programmes Note: The laundry's care labels provide you with additional information on pro- gramme selection. Programme Description Max. load (kg) Cottons Wash hard-wearing items made from cotton, linen 10.0 or blended fabrics. Also suitable as a short programme for normally soiled laundry when you activate Programme setting: ¡... - Page 30 en Programmes Programme Description Max. load (kg) Easy Care Wash items made from synthetic or blended fab- rics. Programme setting: ¡ Max. 60 °C ¡ Max. 1200 rpm Wash items made from cotton, linen, or synthetic or blended fabrics. Suitable for lightly soiled laundry. Programme setting: ¡...
- Page 31 Programmes en Programme Description Max. load (kg) ... further Set additional programmes. – The additional programmes can be found in this programme overview. The selectable programme settings depend on the selected programme. AllergyPlus Wash hard-wearing items made from cotton, linen or blended fabrics. Suitable for allergy sufferers and for strict hygiene requirements.
- Page 32 en Programmes Programme Description Max. load (kg) Automatic Soft Wash delicate items made from cotton, or synthetic or blended fabrics. Gentle laundry care. The degree of soiling and the type of fabric are automatically detected. The washing process is ad- apted. Note: The temperature and spin speed cannot be adjusted in this programme and are set automatic- ally.
-
Page 33: Laundry
Programmes en Programme Description Max. load (kg) Do not use liquid detergent or detergent that is in- tended for woollens or delicates. Note: The drum cleaning indicator flashes to re- mind you if you have not used a programme at 60 °C or higher for a long time. Rapid 15'/30' Wash items made from cotton, or synthetic or blen- ded fabrics. -
Page 34: Preparing The Laundry
en Accessories 10 Accessories Use original accessories. These have been made especially for your appli- ance. Note: Some accessories are avail- able in other colours. Contact → "Customer Service", Page 61. Order number Water inlet hose exten- Extend the water inlet WMZ2381 sion hose for cold water or AquaStop (approx. -
Page 35: Detergents And Care
Detergents and care products en 13.2 Setting a programme 12 Detergents and care products Turn the programme selector and set the required programme. The manufacturer's instructions for → "Programmes", Page 29 use and dosage can be found on the If required, adjust the programme packaging. settings. -
Page 36: Saving The Programme Settings
en operation Adjusting additional programme 13.6 Adding detergent and settings care product Press to call up additional pro- For programmes in which intelligent gramme settings. dosing is not possible or desirable, Select the programme settings. you can add detergent manually. Press to call up the main Note: The dosing recommendation is menu. -
Page 37: Adding Laundry
operation en To pause the programme, after ap- 13.11 Resuming the pro- prox. 10 minutes, press gramme when the pro- To resume the programme, after gramme status is Rinse the desired soaking time, press Hold Requirements 13.9 Adding laundry ¡ Rinse Stop is activated. → "Buttons", Page 28 After the programme starts, you can ¡... -
Page 38: Childproof Lock
en Childproof lock 14 Childproof lock 15 Intelligent dosing sys- Secure your appliance against being operated unintentionally using the The optimum quantities of liquid de- controls. tergent and fabric softener are dis- pensed automatically depending on 14.1 Activating the childproof the programme and settings. lock 15.1 Starting the programme Press and hold the two... -
Page 39: Filling The Dispensers
Intelligent dosing system en Requirements 15.2 Filling the dispensers ¡ The laundry is prepared. If you want to use the intelligent dos- → "Preparing the laundry", Page 34 ing system or if the appliance dis- ¡ The laundry is sorted. plays a notification during operation ¡... -
Page 40: Dispenser Contents
en Home Connect Pour liquid detergent and fabric 15.4 Basic dosage softener into the relevant dis- The basic dosage depends on the pensers. manufacturer's instructions for the de- → "Detergent drawer", Page 18 tergent, the water hardness and the degree of soiling of the laundry. Always set a basic dosage that cor- responds to the dosage for a stand- ard load of 4.5 kg. -
Page 41: Home Connect
Home Connect en ¡ Operating the appliance on the ap- Follow the instructions in the pliance itself always takes priority. Home Connect app. During this time it is not possible to operate the appliance using the 16.3 Activating Wi-Fi on the Home Connect app. appliance 16.1 Setting up the Note: When Wi-Fi is activated, the en- ergy consumption increases in com-... -
Page 42: Remote Start
en Home Connect nect server and if Remote Dia- 16.6 Remote start gnostics is available in the country in Enable the appliance for remote start which you are using the appliance. via the Home Connect app. Tip: For further information and de- tails about the availability of Remote Activating remote start Diagnostics in your country, please Notes... -
Page 43: Basic Settings
Basic settings en Basic setting Description 17 Basic settings Man. network Connect the ap- log-in pliance to a You can configure the basic settings WLAN home net- for your appliance to meet your work (Wi-Fi) needs. without WPS function. 17.1 Overview of the basic → "Setting up settings Home Connect",... -
Page 44: Cleaning And Servicing
en Cleaning and servicing Select the required basic setting. 18.2 Cleaning the detergent → "Overview of the basic settings", drawer Page 43 If you want to replace the liquid de- Adjust the basic setting. tergent or fabric softener in the dis- Press to call up the main menu. penser with another product or if the detergent drawer is dirty, clean the detergent dispenser. - Page 45 Cleaning and servicing en Remove the pump unit. Clean the pump unit with a damp cloth. Unclip the detergent drawer cover and remove it. Clean the detergent drawer and the cover with a soft, damp cloth or hand shower. Empty the detergent drawer. Dry the detergent drawer, cover and pump unit and reinsert them.
-
Page 46: Cleaning The Drain Pump
en Cleaning and servicing Open and remove the service flap. Clean the housing of the detergent drawer in the appliance. Slide a sufficiently large container under the opening. Push in the detergent drawer. Take the drain hose out of the 18.3 Cleaning the drain pump holder. - Page 47 Cleaning and servicing en Cleaning the drain pump CAUTION - Risk of scalding! When you wash at high temperat- Requirement: The drain pump is ures, the detergent solution gets empty. → Page 46 hot. Since water may remain in the Do not touch the hot detergent ▶...
-
Page 48: Cleaning The Intake Opening In The Rubber Gasket
en Cleaning and servicing Ensure that both impellers can Insert and close the service flap. turn. 18.4 Cleaning the intake Insert the pump cap. opening in the rubber Ensure that the parts of the ‒ pump cap are correctly as- gasket sembled. Regularly check the intake opening in the rubber gasket for any block- ages and clean the intake opening. -
Page 49: Troubleshooting
Troubleshooting en 19 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶... - Page 50 en Troubleshooting Fault Cause and troubleshooting "E:30 / -80" Unapproved extension installed on the water drain hose. Remove any unapproved extensions from the water ▶ hose. → "Connecting the appliance", Page 15 The pump cap is not fully screwed in. Ensure that the pump cap is screwed in all the way ▶...
- Page 51 Troubleshooting en Fault Cause and troubleshooting Water cooling To protect the wastewater pipes, the hot detergent solution is cooled before being drained. Wait until the detergent solution has cooled down. ▶ "E:30/-20" Solenoid valve defective. Call the after-sales service. ▶ → "Customer Service", Page 61 Detergent dosage is too high.
-
Page 52: Customer Service", Page
en Troubleshooting Fault Cause and troubleshooting The programme does Clean the pump unit. not start. → "Cleaning the detergent drawer", Page 44 Switch the appliance on. If the display appears again after you clean the pump unit, call customer service. → "Customer Service", Page 61 Note: You can deactivate and manually dose the intel- ligent dosing system until the fault is rectified. -
Page 53: Unapproved Extension Installed On The Water Drain
Troubleshooting en Fault Cause and troubleshooting The water is not drain- Install the water outlet hose at a maximum height of ▶ ing. 1 metre. Pump cover is not correctly assembled. Correctly assemble the pump cover. ▶ Detergent dosage is too high. Immediate measure: Mix one tablespoon of fabric ▶... - Page 54 en Troubleshooting Fault Cause and troubleshooting The programme dura- The programme operation is optimised electronically. tion changes during This may change the programme duration. the wash cycle. Not a fault – no action required. ▶ The unbalanced load detection system eliminates an imbalance by repeatedly redistributing the laundry.
- Page 55 Troubleshooting en Fault Cause and troubleshooting i-DOS cannot be ac- Intelligent dosing is not intended for this programme. tuated. Not a fault – no action required. ▶ → "Starting the programme with intelligent dosing system", Page 38 Programme progress does not allow intelligent dos- ing.
-
Page 56: Cleaning The Drain Pump", Page
en Troubleshooting Fault Cause and troubleshooting Brief whirring noise Intelligent dosing system carries out a function test. after switching on the Not a fault – normal operating noise. ▶ appliance. Loud noises during Appliance is not correctly aligned. the spin cycle. → "Aligning the appliance", Page 16 ▶... - Page 57 Troubleshooting en Fault Cause and troubleshooting The spin result is not Redistribute the laundry in the drum. ▶ satisfactory. The laun- Note: Where possible, mix large and small items in dry is too wet/too the drum. Different sized items of laundry distribute damp.
- Page 58 en Troubleshooting Fault Cause and troubleshooting Detergent residue on If intelligent dosing is activated, reduce the basic ▶ the dry laundry. dosage → Page 40. Insufficient cleaning. Basic dosage not adjusted. If intelligent dosing is activated, adjust the basic ▶ dosage → Page 40. Detergent or care products have congealed in dis- pensers of the intelligent dosing system.
-
Page 59: Cleaning The Drum", Page
Troubleshooting en Fault Cause and troubleshooting Odours have formed Humidity and detergent residue may promote the in the appliance. formation of bacteria. → "Cleaning the drum", Page 44 ▶ If you are not using the appliance, leave the door ▶ and detergent drawer open so that residual water can evaporate. -
Page 60: Emergency Release
en Transportation, storage and disposal 19.1 Emergency release 20.2 Inserting the transit bolts Releasing the door Secure the appliance before trans- Requirement: The drain pump is portation using transit bolts in order empty. → Page 46 to prevent transport damage. ATTENTION! Escaping water may Use a screwdriver to remove the 4 cause material damage. -
Page 61: Disposing Of Old Appliance
Customer Service en 20.4 Disposing of old appli- 21 Customer Service ance Function-relevant genuine spare parts Valuable raw materials can be re- according to the corresponding Eco- used by recycling. design Order can be obtained from Customer Service for a period of at WARNING least 10 years from the date on Risk of harm to health! -
Page 62: Aqua-Stop Guarantee
en Customer Service 21.2 AQUA-STOP guarantee In addition to warranty claims against the seller under the purchase agree- ment and in addition to our manufac- turer's warranty, we offer compensa- tion under the following conditions. ¡ If our Aqua-Stop system is defect- ive and causes water damage, we will make good the damage for private users. -
Page 63: Consumption Values
Consumption values en 22 Consumption values The following information is provided in accordance with the EU Ecodesign Regulation. The values given for programs other than the Eco 40-60 are indicat- ive only and were determined in accordance with the applicable standard EN60456. The automatic dosing function has been deactivated for this pur- pose. -
Page 64: Technical Data
¡ Networked standby mode A detailed RED Declaration of Con- (Wi-Fi): 1.50 W formity can be found online at Water pressure ¡ Minimum: www.bosch-home.com among the 100 kPa additional documents on the product (1 bar) page for your appliance. ¡ Maximum: 1000 kPa (10 bar) Length of the wa- 150 cm... -
Page 65: Declaration Of Conformity
2.4 GHz band (2400–2483.5 MHz): requirements. Max. 100 mW A detailed Declaration of Conformity 5 GHz band (5150–5350 MHz + can be found online at www.bosch- 5470–5725 MHz): Max. 100 mW home.co.uk among the additional documents on the product page for your appliance. UK (NI) 5 GHz WLAN (Wi-Fi): For indoor use only. - Page 68 Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service direct- ory.