Network (Wifi) With Wps Connect Function; Connecting A Device To A Wlan Home Network (Wifi) Without Wps; Function - Bosch WAXH2M71NL User Manual And Installation Instructions

Table of Contents

Advertisement

Remarks
s Follow the safety instructions
ties in this manual and make sure
that they are also observed when
you operate the appliance via the
Home Connect app.
→ "Safety", Page 4
s Operating the device
always takes precedence. During
this time, operation via the Home
Connect app is not possible.
15.1 Connecting device to
WLAN home network
(WiFi) with WPS function
Requirements
s Your router has a WPS

function.

s Wi-Fi on the router is activated.s The
basic WiFi setting on the device
rate is activated.
→ "activate WiFi on the device",
Page 36
s The appliance has
cation reception from the home
network (Wi-Fi).
s The Home Connect app is on the
mobile terminal installed.
On for at least 3 seconds Control via
1.
App
to press.
a The display shows auto reflected
to give.
Press Start/Refill
2.
Press the WPS button on the
3.
router within 2 minutes.
Follow the information in your
router's documentation.
a flashes in the display.
a The device is connecting
with the home Wi-Fi network.
a When on the display con is becoming
displayed and permanent
lights up, the device is connected
to the home WiFi network.
If the display err shows, the device is
4.
not connected to the home Wi-Fi
network.
s
s
Connect the appliance to the
5.
Home Connect app. → Page 36
15.2 Connecting device to
If your router does not have WPS
function, you can manually connect the
device to your home network (Wi-Fi).
Requirements
s Wi-Fi on the router is activated.s The
basic WiFi setting on the device
rate is activated.
→ "activate WiFi on the device",
Page 36
s The appliance has
cation reception from the home
network (Wi-Fi).
s The Home Connect app is on the
mobile terminal installed.
On for at least 3 seconds Control via
1.
App
.
a The display shows auto reflected
to give.
Set the program to position 2.
2.
a The display shows JUICE reflected
to give.
Press Start/Refill
3.
a flashes in the displaya The device
creates its own WiFi
home network with the network
name (SSID) HomeConnect on.
Home Connect
Check if the device is within
range of the Wi-Fi network.
Reconnect the device to the Wi-
Fi network with WPS function.
WLAN home network
(WiFi) without WPS
function
to press.
NL
.
.
35

Advertisement

Table of Contents
loading

Table of Contents