H3C WX5004 Installation Manual page 31
Access controller
Hide thumbs
Also See for WX5004:
- Installation manual (85 pages) ,
- Quick start manual (11 pages) ,
- Configuration manual (64 pages)
Table of Contents
Advertisement
Figure 15
Select the serial interface used for HyperTerminal connection
The system displays the port settings. Set Bits per second to 9600, Data bits to 8,
4.
Parity to None, Stop bits to 1, and Flow control to None. To use the default settings,
click Restore Defaults. Click OK.
Figure 16
Set serial port parameters
31
Advertisement
Table of Contents
