4
Initial startup
Setting up the configuration environment
Connecting a configuration terminal to the access controller
For information about connecting a configuration terminal to the access controller, see
―Connecting interface cables‖ on page 26.
Setting terminal parameters
Start the PC and run the terminal emulation program, such as the Terminal of
1.
Windows 3.1 or the HyperTerminal of Windows 95/98/NT/2000/XP.
Select Start > Program > Accessories > Communications > HyperTerminal. On the
2.
Connection Description interface, type the name of the new connection and click
OK.
Figure 14
Connection description interface
The system displays the Connect To interface. From the Connect using drop-down
3.
list, select the serial interface to be used. (Be sure to select the serial interface to
which the console cable is actually connected.) Click OK.
30