Getting.started.with.your.device; Insert Sim - Alcatel LINKHUB HH42CV User Manual

Reset.button
Use a paperclip or blunt pin to gently press and hold the reset button for 3
seconds. All LEDs will turn on, then off, and finally turn on again once the reset
is completed. You can also reset the device via the Web-UI.
LED.description
Icon Description
•
•
•
•
•
•
•
•
•
•
•
•
•

2. Getting.started.with.your.device

2.1 Insert.SIM
Follow the 3 steps in the illustration below.
1) Open the SIM card slot cover.
2) Insert the SIM card into the SIM slot.
3) Close the SIM card slot cover.
Solid blue: The device is powered on.
Off: The device is powered off.
Solid blue: Signal strength ranges from 1-3 bars, with 3
being the strongest.
Off: No service / No signal / No SIM / Invalid SIM.
Solid blue: Wi-Fi is enabled.
Flashing blue: WPS connection is available.
Off: Wi-Fi is disabled.
Flashing blue: Phone is ringing.
Solid blue: Phone is in call.
Off: Phone is not in use.
Solid blue: Connected to 2G/3G/4G/Ethernet.
Solid red: No SIM available or the device is not registered to
the network.
Flashing blue: Registered to 2G/3G/4G.
7