Table of Contents
Advertisement
2)
Select the network name (SSID) of your Cat4 Router, click Connect, and
enter the Wi-Fi key.
What.should.I.do.if.I.see.the.SSID.but.the.device.fails.to.connect?
Make sure you have entered the correct Wi-Fi key.
What.should.I.do.if.the.network.indicator.is.solid.red?
When there is no SIM, no service, or the device is not registered to the
network, the network indicator on Cat4 Router is solid red.
1)
If using a SIM:
-Make sure the SIM is valid and inserted correctly.
-Move the Cat4 Router to an area with a better signal (try placing it near a
window).
2)
If using an ethernet connection, check if the network is working properly.
Why.does.the.SSID.not.appear.in.the.wireless.network.list?
Follow the steps below to make sure the device is set up correctly:
1)
Check the device to see if the Wi-Fi indicator is on or off.
2)
Refresh the network list on your computer.
For Windows:
1)
Click the Refresh Network icon on the right top corner of the Wireless
Network Connection screen.
Right-click Wireless.Network.Connection.
2)
3)
Click Open.network.and.sharing.centre.
Select Wireless.Management.
4)
5)
Click the wireless network which is not being used, and delete it from
network list.
Click OK and restart your computer.
6)
What. should. I. do. if. it. says. "No. SIM". or. "Invalid. SIM". on. the. Cat4. Router.
configuration.page?
Possible reasons for this may be that there is no SIM inserted in the device,
it is inserted incorrectly, or the SIM is disabled. Try removing your SIM and
reinserting it. Make sure not to touch the contact points when doing so.
23
Hide quick links:
Advertisement
Table of Contents
