Table of Contents
Advertisement
2.4. How.to.connect.in.Wi-Fi.mode
Step.1:.Enabling Wi-Fi on your Cat4 Router.
When the Wi-Fi indicator is solid blue, Wi-Fi is enabled.
Step.2:.Recording the SSID and Wi-Fi Key.
The default SSID and Wi-Fi key are printed on the device label, situated on the
underside of your Cat4 Router.
To prevent unauthorised parties from accessing your Wi-Fi network, it is
recommended that you change the SSID and Wi-Fi key from time to time. For
more information, please refer to the User Guide which can be accessed via
the Web User Interface.
Step.3:.Setting up a Wi-Fi connection
•.
Setting.up.a.Wi-Fi.connection.manually:
1)
From your Wi-Fi enabled client, perform a scan for wireless networks.
2)
Connect to the network name that matches the SSID found on the device
label.
3)
When prompted for a password, enter the Wi-Fi key found on the
device label (this is case sensitive). Your client will notify you when it is
connected.
•.
Setting.up.a.Wi-Fi.connection.through.WPS:
Your client must support WPS, Ensure that Wi-Fi is enabled on the client and
enable WPS.
1)
Open the WPS page on your Web User Interface (Go to Wireless.> WPS).
2)
The Wi-Fi LED will begin to flash blue.
3)
Your device should then connect automatically.
X X X X X XX X X
10
Hide quick links:
Advertisement
Table of Contents
