Network Setup (On Lcd Screen) - D-Link DPH-130S User Manual

2-1

Network Setup (On LCD Screen)

Before you can use DPH-130S IP phone, it must be connected to your network using a
valid IP address. In this section you'll learn how to configure an IP address for this phone
using various supported methods.
The DPH-130S supports three methods to obtain or assign an IP address:
Static IP (IP address is manually entered by user)
PPPoE (IP address will be obtained automatically, for some ADSL users)
DHCP (IP address will be obtained automatically, for some LAN users)
Please determine which method your network (or ISP) uses to assign IP addresses
before you continue. If you are not sure which method you should use, please ask your
network administrator, your ISP, or your telephone service provider. Then use the
following procedures to configure an IP address for the DPH-130S:
>Address Book
Call Records
Call Records
>Setting
1. Press the [MENU] key once.
2. Press the [ >> ] key repeatedly, until " >
Setting " is displayed on the LCD, then press
the [Select] key.
13