Palm Treo 700w Using Manual page 185

5. Select Camera to take a picture and add it to this contact entry
(if your smartphone includes a camera), or select an existing
picture for this contact entry.
6. Select Ring tone, and then press Center
contact entry.
Selecting your call settings
1. Press Start and select Settings.
2. On the Personal tab, select Phone
3. On the Phone tab, set any of the
following options:
• Dialpad: Sets the style for the dial
pad tones (DTMF) in the Phone
application.
— Short tones: Tones sound briefly
as you dial.
— Long tones: Tones continue to
sound until you release the key.
• TTY/TDD: Lets you configure your smartphone for use with a
TTY/TDD device for people who are deaf or hard of hearing.
• After calls from numbers that are not in Contacts, ask if I
want to add them: Indicates whether you are prompted to add
contact entries for numbers that are not already in your
Contacts list.
4. Press OK to finish.
Using Your Treo 700w Smartphone
Phone settings
. Select a tone for this
.
CHAPTER 9
[ ! ]
Before You Begin
Turn on your phone
to access your Phone
Settings. See
"Turning your phone
on and off" on
page 11.
Tip
If you have trouble
accessing a voicemail
system, try changing
the Dialpad tone
setting.
177