Vertical Airflow Function; Operation; Operation Range - Daikin FTXJ20A2V1BW Operation Manual

5 Operation

3 Press to exit to the home screen or use EXIT screen to
return to "indoor unit setting menu".
To connect using SSID and KEY number
1 Open the ONECTA app on your smart device and follow the
steps on the screen.
2 Connect your smart device to the same home network as the
unit.
3 Check if the connection was successful (refer to
status" [ 4 8]).
wireless LAN connection
4 Press to exit to the home screen or use EXIT screen to
return to "indoor unit setting menu".
To confirm the wireless LAN connection status
1 Navigate to the status screen using
confirm.
Status screen
2 Check the Daikin eye.
a
a Daikin eye
b Partly green
c Red, orange or blue
Daikin eye colour alternates
between partly green and...
Red
orange
blue
3 Press to exit to the home screen or use EXIT screen to
return to the indoor unit setting menu.
To reset the connection setting to the factory default
Reset the connection setting to the factory default in case you want
to:
▪ disconnect the wireless LAN and the communication device (e.g.
router) or smart device.
▪ repeat the setting if the connection was unsuccessful.
1 Navigate to the RESET screen using
confirm your selection.
Result: The setting is reset to the factory default.
Operation manual
8
"To confirm the
and . Press
STATUS
b
c
...then wireless adapter is...
not connected
running and ready to connect to
the home network via WPS
button; see "To connect using
button" [ 4 7].
the WPS
connected to the home network:
▪ via SSID + KEY.
or
▪ via the WPS button on the
router.
and . Press
2 Press to exit to the home screen or use EXIT screen to
return to the indoor unit setting menu.
To turn off the wireless LAN connection
1 Enter the wireless LAN connection setting menu and change
the setting to OFF using
selection.
Result: The Daikin eye alternates between green and white.
Communication is OFF.
to
4.4.3

Vertical airflow function

This function helps with optimal airflow and temperature distribution
in heating operation mode. You can turn this function OFF in case
there is furniture or another object under the unit.
Vertical airflow OFF
To turn ON/OFF vertical airflow function
1 In the indoor unit setting menu, navigate to the vertical airflow
setting using and
Vertical airflow function ON
2 Change the setting using
3 Press to confirm your selection.
4 Press again to return to the main menu or press
return to the home screen.
5 Operation
INFORMATION
The indoor unit is delivered with the wireless remote
control as the user interface. This manual describes only
operation with this user interface. If another user interface
is connected, refer to the operation manual of the
connected user interface.
5.1

Operation range

Use the system in the following temperature and humidity ranges for
safe and effective operation.
to
Outdoor temperature for
RXJ models
Reset screen
RESET
and . Press to confirm your
Vertical airflow ON
.
Vertical airflow function OFF
and .
Cooling and Heating
(a)(b)
drying
–10~50°C DB –20~24°C DB
–21~18°C WB
FTXJ-A(W)(S)(B)
Daikin room air conditioner
3P485919-15W – 2021.12
to
(a)