To Adjust Vertical Airflow Direction; To Adjust Horizontal Airflow Direction; To Use 3D Airflow Direction; To Start/Stop Comfort Airflow Operation - Daikin FTXJ20A2V1BW Operation Manual

Airflow direction setting menu
2 In this menu, perform the following airflow settings. Then press
to return to the main menu or press
screen.
5.4.1

To adjust vertical airflow direction

1 In the airflow direction setting menu, navigate to the vertical
airflow screen using and
2 Change the setting using
Vertical airflow - swing
3 For vertical swing. Press
Result: appears on the bottom of the home screen. The
flaps (horizontal blades) will begin to swing.
4 For fixed position. Press
position.
Result: disappears from the bottom of the home screen.
The flaps will stop moving.
5.4.2

To adjust horizontal airflow direction

1 In the airflow direction setting menu, navigate to the horizontal
airflow screen using and
2 Change the setting using
Horizontal airflow - swing
3 For horizontal swing. Press
Result: appears on the bottom of the home screen. The
louvers (vertical blades) will begin to swing.
4 For fixed position. Press
desired position.
Result: disappears from the bottom of the home screen.
The louvers will stop moving.
INFORMATION
When the unit is installed in a corner of a room, the
direction of the louvers should be facing away from the
wall. Efficiency will drop if a wall blocks the air.
5.4.3

To use 3D airflow direction

1 Set the vertical and the horizontal airflow to ON.
2 appears on the bottom of the home screen. The flaps
(horizontal blades) and louvers (vertical blades) will begin to
swing.
FTXJ-A(W)(S)(B)
Daikin room air conditioner
3P485919-15W – 2021.12
to exit to the home
.
and .
Vertical airflow - fixed
to confirm your selection.
when the flaps reach the desired
.
and .
Horizontal airflow - fixed
to confirm your selection.
when the louvers reach the
Vertical airflow ON
3 To use fixed position, set the vertical and the horizontal airflow
to OFF when the flaps and louvers reach the desired position.
Result: disappears from the bottom of the home screen.
The flaps and the louvers will stop moving.
5.4.4

To start/stop Comfort airflow operation

1 In the airflow direction setting menu, navigate to the comfort
airflow screen using and
2 Change the setting using
Comfort airflow active
3 Press to confirm your selection.
Result: Comfort airflow active:
the home screen.
Result: Comfort airflow disabled:
bottom of the home screen.
5.5

Intelligent eye operation

The system detects movement in the room and automatically adjusts
the airflow direction and temperature in order to avoid direct contact
with people. If no movement is detected for 20 minutes, the system
switches to energy saving operation:
About the Intelligent eye sensor
NOTICE
▪ Do NOT hit or push the Intelligent eye sensor. Doing so
may lead to malfunction.
▪ Do NOT place large objects near the Intelligent eye
sensor.
INFORMATION
Night set mode (OFF timer) CANNOT be used at the same
time with Intelligent eye operation.
▪ Detection range. Up to 9 m.
▪ Detection sensitivity. Changes according to location, the number
of persons in the room, temperature range, etc.
▪ Detection mistakes. The sensor may mistakenly detect pets,
sunlight, moving curtains, etc.
5.5.1

To start/stop Intelligent eye operation

1 Press to enter the main menu and navigate to the intelligent
eye screen using and
2 Change the setting using
5 Operation
Horizontal airflow ON
.
and .
Comfort airflow disabled
appears on the bottom of
disappears from the
.
and .
Operation manual
11