Use In The Water; Operation; Backlight And Keypad Lock - Oregon Scientific RA126 User Manual

Appears when the battery
is too low to operate the
sensor. "- -" is shown instead
of temperature and compass
values.
To replace battery:
1. Using a coin, remove battery compartment lid by twisting
counter-clockwise until it clicks out of place.
2. Remove the old batteries and insert the new matching
the polarities.
3. Replace the lid by twisting it clockwise until firmly in
place.
NOTE
When battery is replaced it is important to re-
calibrate the magnetic sensor.

USE IN THE WATER

The RA126 is water-resistant up to 50 meters (164 feet).
SHOWERING
(WARM/
RAIN COOL
SPLASHES WATER
ETC ONLY)
50M /
164
OK OK
FEET
NOTE
Set the unit before exposing it to excessive water.
Pressing the keys while in the water or during heavy
rainstorms may cause water to enter the unit.

OPERATION

BACKLIGHT AND KEYPAD LOCK

Press to turn backlight ON for 5 seconds.
NOTE
The backlight function will not operate while the low
battery icon is displayed and it will return to normal
once batteries have been replaced.
To toggle keypad lock ON / OFF:
Press and hold /
4
SHALLOW
LIGHT DIVING/ SNORKELING
SWIMMING SURFING/ / DEEP
/ SHALLOW WATER WATER
WATER SPORTS DIVING
OK OK NO
. indicates keypad is locked.