Table of Contents
Advertisement
OTHER RECORDING FUNCTIONS
1.
In the REC mode, press [MENU].
2.
Select the "Memory" tab, select the item you
want to change, and then press [ ].
3.
Use [ ] and [ ] to select the setting you
want, and then press [SET].
To do this:
Turn on mode memory so settings
are restored at power on
Turn off mode memory so settings
are initialized at power on
Select this setting:
On
Off
82
IMPORTANT!
• Note that BESTSHOT mode settings take priority
over mode memory settings. If you turn the camera
off while in the BESTSHOT mode, the camera's
Flash, White Balance, and ISO Sensitivity will be
configured according to the BESTSHOT sample
scene when you turn it back on again, regardless of
mode memory on/off setting.
• Any settings (flash, focus mode, EV shift, white
balance, ISO sensitivity) that are configured as a
result of selecting a preset setup in the Business
Shot mode revert to their initial defaults when you
change the mode switch setting or turn the camera
off, regardless of whether mode memory is turned on
or off for the settings.
Advertisement
Table of Contents
