Dead Pixel Fixer; General - Blackmagicdesign Cintel Installation And Operation Manual

Motion Threshold:
‚
motion are considered to be dirt and artifacts. At lower values more dirt may escape
correction, but you'll experience fewer motion artifacts. At higher values, more dirt will
be eliminated, but you may experience more motion artifacts in footage with camera or
subject motion.
Edge Ignore: This slider lets you exclude hard edges in the picture from being
‚
affected by dirt or artifacts that are removed. Higher values omit more edges from
being affected.

Dead Pixel Fixer

If your scanner has one or more 'dead' or 'stuck' pixels in the sensor, you may have black or
white spots that are not moving in the image. This filter is designed to let you place patches on
each dead or stuck pixel, identifying them so you can use different methods of fixing
the problem.
In many respects, the Dead Pixel Fixer is similar to the Dust Buster, however the Dust Buster
effect is designed to repair transient bits of dust and dirt that only last for a frame or two,
whereas the Dead Pixel Fixer is designed to work on blemishes that are fixed in place for the
duration of a clip.
To fix dead or stuck pixels, apply the Dead Pixel Fixer filter, make sure the OFX onscreen
controls are enabled in the viewer, and then click on each pixel you need to fix with the mouse
to place a patch on it. You can click anywhere on the image to place as many patches as you
like, there's no limit. You can also Option-click to delete patches you no longer need. To move
any patches, simply drag it to another location.
Multiple dead pixel removal patches
When you place multiple patches, you can click to select whichever patches you want to adjust
the controls for. Each patch can have different control settings.

General

These top level controls let you choose how to draw patches with which to repair blemishes in
the frame, whether or not to show their on-screen controls, and how.
Patch Style: There are three different kinds of patches you can draw to deal with
‚
different kinds of blemishes in the frame.
– Draw Rect: Click and drag to place a rectangular patch of any size from one corner to
the opposite corner. Once drawn, you can click on any edge of the overlay and drag
to reposition it.
This slider lets you choose the threshold at which pixels in
Dead Pixel Fixer 94