Reading Audio - Blackmagicdesign Cintel Installation And Operation Manual

7 Reattach the Audio and KeyKode Reader covers and tighten the cover screws.
Reattach the upper adjustment knob and lightly tighten the retention screw
to the flat side of the spindle.
Reattach the reader's covers by tightening the six captive M3 screws and reattach
the adjustment knob by tightening the screw against the flat edge of the spindle.

Reading Audio

With the Audio and KeyKode Reader attached, your scanner can record optical audio
information from 35 and 16mm film and magnetic audio information from 16mm film.
Lacing Film
To start recording audio information in real time, the first thing you'll need to do is lace
your film through the reader's audio path. The correct lacing path is shown below.
Lace film through the Audio and KeyKode Reader's upper section to read audio
NOTE When scanning optical audio pay particular attention to the position
of the 16mm and 35mm scanning LEDs. 35mm is closer to the Cintel chassis,
while 16mm is further away.
Optional Audio and KeyKode Reader 48