Refer to the List of Materials submitted for the order if INSTALLATION non-standard materials were provided. Figure Numbers suffixed with “D” (e.g., 991-D) indicate the valve has an ANSI Class 125 flanged Refer to Page 4 for details of construction and parts pipeline connection, Figure Numbers suffixed with “U”...
START-UP It is not necessary to disassemble the entire valve to The valve generally does not require any calibration replace the shaft packing, follow steps 1 to 3 and 5a. or adjustment prior to start-up. The counterweight(s) should be initially placed at the far end of the arm and Ensure there is no pressure within the valve secured by tightening the set screw (31A).
REPLACEMENT PARTS WARRANTY: Genuine replacement parts are available from your The Warranty for GA Industries valves is local VAG/GA Industries representative or from the included in our Terms and Conditions which can factory: be found here: https://gaindustries.com/terms...
Page 5
Part No. Part Name Std. Material Part No. Part Name Std. Material Body Cast Iron Gland Cast Iron Body Seat Bronze or SS Gland Stud & Nut Steel Seat O-Ring Buna-N Packing Teflon Seat Pins Stainless Steel Shaft Lock Pin Brass Disc with Center Pin Cast Iron/Steel...