HUANUO HNLA6 Instruction Manual

Supplied Parts and Hardware
1PC
1PC Leg 1PC Leg
Laptop Tray
A
2PCS Bolt M5X8mm
8PCS
1PC Cable Edge Stopper
Step 1 Secure the legs to the tabletop.
Step 2 Press and hold the button on the joint of the leg then rotate the leg
to your desired angle.
Note: Please refer to the procedures in page 4 for more detail.
The angles of the two legs must be the same.
- 1 -
Step 3 Secure the mouse tray to the side of laptop tray
1PC Mouse Tray
B
5/32in. (4mm)
1PC Allen Key
B
A
- 2 -
Step 4 Secure the edge stoppers to the front lip of the laptop tray.
How to Use the Cooling Fan
Connect the USB end of the cable to your laptop, then connect the other
end of the cable to the port of the cooling fan.
Turn on the switch when use the cooling fan.
OPEN
- 3 -