Supermicro X13SAE User Manual page 82

Super X13SAE/X13SAE-F User's Manual
DVMT Total Gfx Mem
This feature controls the DVMT 5.0 total graphics size to be used by the internal graph-
ics device. The options are 128M, 256M, and MAX.
PM Support
This feature enables PM support. The options are Enabled and Disabled.
PAVP Enable
This feature enables PAVP support. The options are Enabled and Disabled.
Cdynmax Clamping Enable
This feature enables Cdynmax Clamping. The options are Enabled and Disabled.
Graphics Clock Frequency
This feature controls the graphics clock frequency. Select the highest clock frequency
supported by the platform. The default is Max CdClock freq based on Reference Clk.
DMI/OPI Configuration
DMI/OPI Configuration
The following DMI information is displayed:
DMI
DMI Gen3 ASPM
Use this feature to set the Active State Power Management (ASPM) state on the
System Agent (SA) side of the DMI Link. The options are Disabled, Auto, ASPM L0s,
ASPM L1, and ASPM L0sL1.
PEG Port Configuration
PEG Port Configuration
PCIE M.2-M3
Enable Root Port
Select Enable to activate the Root Port. The options are Disabled, Enabled, and
Auto.
82