Focus
The initial projection may be blurry and out of focus. Scroll the manual focus dial on the
projector until the projection becomes clear.
Note:
It is normal if the centre of the projection is sharp and has slightly blurred edges.
Multimedia connection
This projector is capable of connecting to various forms of multimedia. These include:
• USB
• HDMI
• MHL
• AV cable
• Audio out
USB connection
• Insert a USB into one of the USB input ports.
• Press the SOURCE button on the remote control or Source/down on the control panel.
• On screen, press Input source > 'USB' as the signal source.
• Press Play/pause
watching.
HDMI connection
This projector supports most devices with HDMI ports.
• Connect a HDMI cable (not provided) to the projector and your device.
• Press the SOURCE button on the remote control or Source/down on the control panel.
• On screen, press Input source > 'HDMI 1' or 'HDMI 2' as the signal source.
Note:
If connecting with an Apple device (for example, iPad, iPhone), you may need to use a
Lightning digital AV adapter to connect via HDMI.
to begin watching content. Press Play/pause
again to stop