Advertisement
OPERATION
1. Connect the power cord as shown below and turn on the power socket. The indicator
light will turn red, meaning the projector has entered standby.
2. Remove the lens cover and press the power button
control to turn on the projector.
3. If the projector is mounted to the ceiling, the projection will need to be inverted. On the
remote control, press MENU > PICTURE > Projection Mode and select one of the ceiling
mounted options (Front/Ceiling, or Rear Ceiling) as referenced below.
Front/Ceiling
If the projector is on the table, press MENU > PICTURE > Projection Mode and select
one of the table mounted options (Front or Rear) as referenced below.
Front
on the control panel or remote
Rear/Ceiling
Rear
Advertisement
