Philips AquaTrio Cordless 9000 Series Manual page 35

Error code
Information code
Cause
The temperature is too low.
The temperature is too high.
Cause
The dirty water tank is full.
The AquaSpin nozzle is not
connected (properly).
The AquaSpin nozzle is stuck.
This is a safety cut-off if
something is stuck in the nozzle
(for instance, a power cable or
a toy).
Solution
Make sure the temperature in the room
where the appliance is used, stored, or
charged is above 5 °C.
Make sure the temperature in the room
where the appliance is used, stored, or
charged is below 35 °C. Do not expose the
device to direct sunlight or high
temperatures (near hot stoves, in
microwave ovens, or on induction cookers).
Batteries may explode if overheated.
Solution
Empty the dirty water tank.
Connect the AquaSpin nozzle.
Check the brushes, bearings, motor parts,
and caps for hair or other obstacles and
remove them. If there are no obstacles,
switching the appliance off and on might
solve the problem.
English
37