Table of Contents
Advertisement
The FPI-32 Programmer/Tester was developed to be user-
friendly. Most users will find that it can be operated by simply
responding at the keypad to the displays shown.
This manual is available to the user to present an overview of
the Programmer/Tester and for ready reference.
TO ALL PREVIOUS USERS OF THE FPI-32
PROGRAMMER/TESTER:
Due to the implementation of the advanced searching algo-
rithm, devices connected to the TRI/MSI input jack of the
FPI-32 must be connected with the correct polarity. If a de-
vice is not found by the programmer/tester, simply reverse
the input leads and the device should be found within three
seconds. If the display continues to read Searching for De-
vice, the connected device may be inoperable.
firealarmresources.com
IMPORTANT NOTE
Advertisement
Table of Contents
