Table of Contents
Advertisement
DEVICE FAILED
After several seconds the Programmer/Test displays the following mes-
sage if the device failed to program.
L Respond:
YES - The Programmer/Tester enters Step 2.
Note: The next logical address in sequence will not be affected.
NO - The Programmer/Tester returns to the Power Up sequence.
C
- The Programmer/Tester returns to the Power Up sequence.
NOTE: If at any point the PROG key is pressed, the Programmer/Tester
automatically restarts the program mode with the logical ad-
dress reset back to one.
firealarmresources.com
DEVICE FAILED!!
CONTINUE?
PROGRAM MODE
15
Advertisement
Table of Contents
