Table of Contents
Advertisement
PROGRAM MODE
L Install the device: no response necessary.
NOTE: The Programmer/Tester automatically detects the presence of
the inserted device. There is no need to depress any keypad
keys once the device has been inserted. When the device is
detected, the Programmer/Tester will respond with:
PROGRAM MODE
PLEASE WAIT...
After approximately 2 seconds the Programmer/Tester enters Step 2.
STEP 2 — VERIFYING THE DEVICE TYPE AND
ADDRESS
The Programmer/Tester displays the device type on the first line. The
recognizable device types are as follows:
CZM1
Dual TRI
FP-11
FPT-11
ID-60I/ID-60IH
ID-60IA/ID-60IAH
ID-60IB/ID-60IBH
The second line displays as follows:
Where:
@1 = The first logical address for the device.
@2 = The second logical address for dual devices.
8
firealarmresources.com
ID-60P/ID-60PT
ILI-1/ILI-1H
ILI-1A/ILI-1AH
ILI-1B/ILI-1BH
ILP-1
ILP-2
ILT-1
ADR: @1/@2, OK?
MSI
MSI 2 Stage
New Device
TRI
VCP/ICP TZ
VCP/ICP 25 SZ
VCP/ICP 70 SZ
Advertisement
Table of Contents
