Texas Instruments SWIFT TPS54350EVM-235 User Manual page 5

About This Manual
This user's guide describes the characteristics, operation, and the use of the
TPS54350EVM−235 evaluation module. It covers all pertinent areas involved
to properly use this EVM board along with the devices that it supports. The
physical PCB layout, schematic diagram, and bill of materials are included.
How to Use This Manual
This document contains the following chapters:
-
-
-
-
FCC Warning
This equipment is intended for use in a laboratory test environment only. It gen-
erates, uses, and can radiate radio frequency energy and has not been tested
for compliance with the limits of computing devices pursuant to subpart J of
part 15 of FCC rules, which are designed to provide reasonable protection
against radio frequency interference. Operation of this equipment in other en-
vironments may cause interference with radio communications, in which case
the user at his own expense will be required to take whatever measures may
be required to correct this interference.
Trademarks
SWIFT and PowerPAD are trademarks of Texas Instruments.
Chapter 1Introduction
Chapter 2Test Setup and Results
Chapter 3Board Layout
Chapter 4Schematic and Bill of Materials
How to Use This Manual
Preface
Read This First
iii