Page 3
_________________________________________________________ 4- 16 DEUTSCH 17 - 27 ENGLISH 28 - 38 FRANÇAIS 39 - 49 ITALIANO 50 - 60 PORTUGUÊS 61 - 71 ESPAÑOL 72 - 82 POLSKI 83 - 93 ČESKY 94 - 104 TÜRKÇE 105 - 115 ΕΛΛΗΝΙΚA...
Page 4
SAFETY _______________________________________________ Please note the following instructions Pull out the power supply unit when using the appliance: after use. The appliance is designed for If not already present, for addi- domestic use only. tional protection it is recommend to install a residual-current-oper- Observe these instructions in ated protective device (RCD) order to prevent damage to the...
OVERVIEW __________________________________________ See the illustrations on page 2. Extendable plug-in comb system suitable for both cutting Controls widths, with precise trimming Professional cutting head grade display for beard lengths made from industrial ceramic of 2, 4, 6, 8 and 10 mm. (width 25 mm).
POWER SUPPLY ___________________________________ Operation with The ambient temperature should be between 5 °C and 40 °C. rechargeable batteries When fully charged, the appliance When operating the appliance with works for around 40 minutes. the built-in nickel metal hydride It is not advisable to charge the battery, only use the power unit batteries after every use, especially supplied for charging.
Page 7
POWER SUPPLY ___________________________________ Mains operation (with the power supply unit) Check if the mains voltage on the type plate of the power supply unit supplied corresponds to your local mains supply. The only way to disconnect the device from the mains is to unplug the power supply unit.
OPERATION ________________________________________ Special features Function 1 This appliance has four separate Beard trimming functions: Using the ceramic cutting head – Function 1: for precise and (width 25 mm). smooth beard trimming at a width of 25 mm. – Function 2: for cutting fine lines at a width of 14 mm.
Page 9
OPERATION ________________________________________ Loosen the beard hair by Function 2 combing the beard in the Cutting fine lines direction the hair grows. Using the trimming attachment Note (width 14 mm). Press and hold down switch use the turbo speed for removing any unwanted hair before you begin styling.
Page 10
OPERATION ________________________________________ Function 3 Pull the extendable attachment from behind, with the combs Trimming beards at over the cutting head and let it certain cutting lengths click into the locking tab. Using the extendable attachment Adjust the cutting length (2, 4, 6, 8 or 10 mm) by pressing on the lock under the cutting length display and then move the...
Page 11
OPERATION ________________________________________ Function 4 Close shaving Using the shaving attachment If required, remove the attach- ment by pressing down both thumbs on the front of the attachment and pushing back. Insert the shaving attachment at the back with the guide tab and press it down with your thumbs until it clicks into place.
CLEANING AND CARE ___________________________ Cleaning and care Use a soft, dry cloth or the brush supplied to clean the appliance Switch off the appliance and housing and the charging unit. unplug it if you are running it Caution from the mains. Never put the appliance, Remove the attachment and charging unit or power supply...
CLEANING AND CARE ___________________________ Storage Environmental note If you do not want to use the appli- This product has been made from ance for a long period of time, high-quality parts and materials please store it carefully. which can be re-used and recycled. Make sure it is unplugged, has Therefore, do not throw the product completely cooled down and all...
INFORMATION ____________________________________ Technical data This product fulfils the European directives 2004/108/EC and 2006/95/EC. Power supply Batteries: Nickel metal hydride 1200 mA Power supply unit Ni-MH Technical and design modifications reserved. ENGLISH 27...
Need help?
Do you have a question about the MT 6830 and is the answer not in the manual?
Questions and answers