Table of Contents
Advertisement
OPERATION ______________________________
Note
The comb attachments fit both
7
cutting heads.
Push the comb attachment care-
3
fully and firmly onto the rounded
rear half of the cutting head
from above and let it click into
place.
Press the
4
C
the appliance.
Begin use.
5
Press the
6
C
the appliance after use.
After use, remove the comb
7
attachment
1
ing the locking tab at the back
and removing the comb attach-
ment.
button to switch on
button to switch off
to
by press-
6
Thinning out hair ...
... using the comb attachment
(thinning to a length of 2 mm).
If necessary, remove the attach-
1
ment by pressing in both side
catches
and lifting off.
B
Insert attachment
2
38 mm) or
9
carefully at the top and press
down until it clicks into place.
Push the comb attachment
3
carefully and firmly onto the
rounded rear half of the cutting
head from above and let it click
into place.
4
Press the
C
the appliance.
Begin use.
5
Press the
6
C
the appliance after use.
7
After use, remove the comb
attachment
locking tab at the back and
removing the attachment.
7
(width
A
(width 30 mm)
7
button to switch on
button to switch off
by pressing the
7
ENGLISH 25
Advertisement
Table of Contents
