Manual Factory Reset
1
Ensure the NF18MESH is powered on.
2
On the back side of the NF18MESH, there is a small hole in the plastic with the word "Reset" printed
above it.
3
This is the recessed reset button:
4
Insert the end of a paper clip or other rigid, thin piece of metal into the Reset pinhole and depress
and hold in for 10-12 seconds.
If this does not happen:
a
Disconnect the power supply cable for 30 seconds and then reconnect it.
b
Then depress the Reset button and hold in for 10-12 seconds.
5
The NF18MESH is back to its factory defaults, you now need to reconfigure the broadband settings via
the user interface.
Note – If you had previously backed up your configuration, you can now restore your settings by uploading your .config file.
6
To reconfigure the broadband settings:
a
Open a web browser (such as Internet Explorer, Google Chrome or Firefox), type
http://192.168.20.1
b
At the login screen, type the User Name and the Password as printed on the sticker and click
Log In>.
NF18MESH – Restore Factory Default Settings Guide
FA01256 v1.0 23 June 2020
Back panel of NF18MESH showing Reset pinhole
into the address bar and press Enter.
6 of 6
Need help?
Do you have a question about the NetComm NF18MESH and is the answer not in the manual?