Casa Systems NetComm NF18MESH Settings Manual
Hide thumbs
Also See for NetComm NF18MESH:
- Quick start manual (33 pages) ,
- Backup & restore configuration manual (5 pages)
Related Manuals for Casa Systems NetComm NF18MESH
Summary of Contents for Casa Systems NetComm NF18MESH
- Page 1 Restore Factory Default Settings Guide NF18MESH Doc No. FA01255 NF18MESH – Restore Factory Default Settings Guide FA01256 v1.0 23 June 2020...
- Page 2 Copyright© 2020 Casa Systems, Inc. All rights reserved. The information contained herein is proprietary to Casa Systems, Inc. No part of this document may be translated, transcribed, reproduced, in any form, or by any means without prior written consent of Casa Systems, Inc.
- Page 3 3 of 6 About Factory Resets A factory reset on the NF18MESH returns all settings to the default settings as they were when shipped from the factory. Important – It is particularly important to perform a factory reset after upgrading the NF18MESH firmware to ensure the firmware installation is completed correctly.
- Page 4 4 of 6 Restore Default Settings from Web interface Click on the Advanced menu on the left-hand side of the screen, then click on the Configurations option in the System group. Tools – Navigate to Advanced Configurations To reset the NF18MESH to its factory settings, select the Factory Reset radio button and click the Restore Default Settings button.
- Page 5 5 of 6 Restore Default Settings Note – You may also perform configuration Backup and restore configuration from this page. A pop-up dialog box will prompt: “Are you sure you want to restore factory default settings?” Reset command confirmation dialog Click OK to confirm the reset.
- Page 6 6 of 6 Manual Factory Reset Ensure the NF18MESH is powered on. On the back side of the NF18MESH, there is a small hole in the plastic with the word “Reset” printed above it. This is the recessed reset button: Back panel of NF18MESH showing Reset pinhole Insert the end of a paper clip or other rigid, thin piece of metal into the Reset pinhole and depress and hold in for 10-12 seconds.
Need help?
Do you have a question about the NetComm NF18MESH and is the answer not in the manual?
Questions and answers