Adjusting The Parquet/Carpet Brush; Operation - Beko VCO 32804 AW User Manual

3 Usage
3.5 Adjusting the parquet/carpet
brush
Press the adjustment latch (10) located on the
parquet/carpet brush (11) and;
• Vacuum on firm ground and parquet; extend the
brush before vacuuming.
• Vacuum on carpets and rugs; retract the brush
before vacuuming.

3.6 Operation

1. Plug in the appliance after pulling the power
plug located at the back of the appliance.
WARNING: Stop pulling the appliance
A
cable when it comes to the yellow mark
located on it. After the yellow mark, the red
mark will come. Do not pull any more after
reaching the red mark.
2. Use the suction power adjustment knob (3)
found on the appliance to set it to the desired
suction power (see 3.6).
3. Press the on/off button (1) to switch on your
appliance.
Vacuum Cleaner / User Manual
3.7 Accessories
Accessories have been designed in one piece to
save space and provide practical use.
Upholstery tool
Suitable for cleaning the floorings,
stair steps, inside of the cars, sofas,
armchairs etc.
Dust brush
Suitable for cleaning the curtains,
and sensitive and fragile objects.
Crevice tool
Suitable for the cleaning of the
surfaces which are difficult to
clean, such as the areas
remaining under the sofas and
furniture.
A
WARNING: The crevice tool must be
adjusted to remain outside.
• Pull the accessory to remove it when the process
is complete.
A
WARNING: Do not make cleaning by
using the handle's (15) end part.
9 / EN