Table of Contents
Advertisement
Using Jaguar as an example:
Steering Column Calibration
If the steering column or instrument cluster is replaced or the instrument
cluster software is updated, a body system steering column calibration is
required.
1.
Tap the Service application button from the CR Genius Job Menu.
2.
Tap SAS button and wait for the vehicle manufacturer screen.
Then tap Jaguar icon from the screen. Waiting for vehicle
communication.
3.
You can tap Auto Identify to acquire vehicle VIN information and
tap OK to confirm. Or you can tap the Vehicle Select to choose
the correct vehicle according to the on-screen instructions. For
details, please refer to the introduction of the vehicle identification
chapter.
Select "body system steering column calibration" in the function
4.
list and follow the screen prompts. The list may vary by vehicle.
Figure 5-27 Sample SAS Function Screen 1
5.
This routine is required if the steering column or the instrument
cluster is replaced or the instrument cluster software is updated.
48
Advertisement
Table of Contents
