iCarsoft CR Genius User Manual page 5

ignition wires and spark plugs. These components create hazardous
voltages when the engine is running.

Keep a fire extinguisher suitable for gasoline, chemical, and electrical fires
nearby.

Do not connect or disconnect any test equipment while the ignition is on or
the engine is running.

Keep the test equipment dry, clean, free from oil, water or grease. Use a
mild detergent on a clean cloth to clean the outside of the equipment as
necessary.

Do not drive the vehicle and operate the test equipment at the same time.
Any distraction may cause an accident.

Refer to the service manual for the vehicle being serviced and adhere to all
diagnostic procedures and precautions. Failure to do so may result in
personal injury or damage to the test equipment.

To avoid damaging the test equipment or generating false data, make sure
the vehicle battery is fully charged and the connection to the vehicle DLC is
clean and secure.

Do not place the test equipment on the distributor of the vehicle. Strong
electro-magnetic interference can damage the equipment.

Please ensure that the distance between the device and the human body is
at least 20cm, otherwise personal injury may be caused.
III
A4-2022.03