Table of Contents
Advertisement
Scan the control unit of the whole vehicle, at the same time, the fault
information of each control unit is detected to show the control unit list and fault
status.
1. Main Section
Left side – Show vehicle control unit system name.
Right side – Show vehicle control unit status.
Fault | (7) ： Indicates that the fault code is detected; 7 represents
the number of faults detected.
Pass: Indicates that the vehicle is equipped with this system and
has no fault code.
Fitted: Indicates that the vehicle is equipped with this system.
Not Fitted: Indicates that it is detected that the vehicle is not
equipped with this system.
Unknown: Indicates that it is detected that it is unknown whether
the vehicle is equipped with this system.
Scanning: Indicates that the device is scanning the vehicle system.
2. Button area
[Quick Erase] – Press this button to quickly clear the fault code.
[Pause] / [Continue] – Press this button to pause or continue scanning.
[Report] – Press this button to view the fault reports generated during
diagnosis.
[ Back Button] – Returns to the previous screen or exits Auto Scan.
Figure 4-12 Sample Quick Test Screen
18
Advertisement
Table of Contents
