Table of Contents
Advertisement
Access point name
— Enter the name for the
•
access point. The name is usually provided by
your service provider or network operator.
User name
— Enter your user name if required
•
by the service provider. User names are often
case-sensitive and provided by your service
provider.
Prompt password
— Select
•
password each time you log into a server or
to save the password in your device memory and
automate the login.
Password
— Enter your password if required by
•
the service provider. The password is often case-
sensitive provided by the service provider.
Authentication
— Select
•
your password encrypted or
password encrypted when possible.
Homepage
— Enter the Web address of the page
•
you want to display as a home page when you
use this access point.
4. After defining the settings, select
Advanced settings
to define the advanced settings
or
Back
to save the settings and exit.
For information on the advanced settings, see the
extended user guide on the Web.
Set up an Internet access point for
wireless LAN
1. Select
Menu
Tools
Settings
>
>
points.
2. Select
Options
New access
>
existing access point as a basis for the new one,
3. Define the following settings.
Yes
to enter your
No
Secure
to always send
Normal
to send your
Options
>
Connection
Access
>
>
point. To use an
The settings available for editing may vary.
select
Use existing
settings. To start with an empty
access point, select
Use default
Connection name
— Enter a descriptive name for
•
the connection.
Data bearer
— Select
Wireless
•
WLAN netw. name
— To enter the service set
•
identifier (SSID), that is, the name that identifies
the specific wireless LAN, select
To select the network from the wireless LANs in
range, select
Search for
netw..
Network status
— Select
•
you are connecting to is hidden, or
not hidden.
WLAN netw. mode
— If you select
•
Infrastructure, devices can communicate with
each other and with wired LAN devices through
a wireless LAN access point. If you select Ad-hoc,
devices can send and receive data directly with
each other, and no wireless LAN access point is
needed.
WLAN security mode
— You must select the same
•
security mode that is used in the wireless LAN
access point. If you select WEP (wired equivalent
privacy), 802.1x, or WPA (Wi-Fi protected access),
you must also configure the relevant additional
settings. See the extended user guide on the Web
or the device help for more information.
WLAN security sett.
— Edit the security settings
•
for the selected
WLAN security
Homepage
— Enter the Web address of the page
•
you want to display as a home page when you
use this access point.
settings.
LAN.
Enter
manually.
Hidden
if the network
Public
if it is
mode.
57
Advertisement
Table of Contents
