Call Settings - Nokia RM-10 User Manual

Navigation key right, Navigation key
•
key down, Navigation key
key — Change the shortcuts that open when you
scroll to different directions. These settings are not
available if you select Active standby
Display settings
Select Display and from the following:
Light sensor — Adjust the amount of light required
•
to illuminate the device display.
Power saver time-out — Select the amount of time
•
before the screen saver is activated. Activating the
screen saver lengthens the device operating time.
Light time-out — Set how quickly after last keypress
•
the display dims.

Call settings

Select Call and from the following:
Send my caller ID — Select
•
number to the person you are calling or
network to let the network to determine whether
your caller ID is sent.
Send my net call ID — Set this feature on if you want
•
to display your net caller ID to the person you are
calling.
Call waiting — Select Activate
•
incoming call while you have a call in progress or
Check status to check if the function is active on the
network.
left, Navigat.
up, Selection
> On.
Yes to display your phone
Set by
to be notified of a new
Internet call waiting — Activate this feature to be
•
notified of a new incoming call while you have a net
call in progress.
Internet call alert — Set this on if you want the device
•
to respond to the caller that it is busy. If you set this
off, the device emits a busy tone to the caller and you
receive a notification about the missed call.
Default call type — Select
•
calls to the phone number or
call the number or address.
Reject call with SMS — Select
•
message automatically to the person who is calling
you informing why you cannot answer their
incoming call.
Message text — Enter the text that is sent when you
•
cannot answer an incoming call and want to
automatically send a text message as a reply.
Image in video call — Select
•
still image to be displayed instead of a video during
a video call or None to not send any image during a
video call.
Automatic redial — Select
•
was busy at the first call attempt. Your device makes
a maximum of 10 attempts to connect the call.
Summary after call — Select
•
approximate duration of the last call.
Speed dialling — Select On
•
on your device. To dial a phone number assigned to
the speed dialing keys (2-9), press and hold the key.
See "Speed dial," p. 26.
Anykey answer — Select
•
call by briefly pressing any key, except the end key.
Line in use — Select Line 1
•
phone line for outgoing calls and text messages
Cellular to make normal
Internet to use VoIP to
Yes to send a text
Use selected to select a
On to redial a number if it
On to briefly display the
to activate speed dialing
On to answer an incoming
or Line 2 to change the
87