Net Calls - Nokia RM-10 User Manual

To switch between channels during multiple calls,
select Swap. The active channel is highlighted.
To view the currently active participants in the channel,
select Options Active
>
To invite a participant to a channel, select
Send invitation.
Push to talk log
To open the push to talk log, select
The log shows the date, time, duration, and other
details of your push to talk calls.
Exit push to talk
Select Options > Exit. Select
service. Press No if you want to keep the application
active on the background.

Net calls

Your device supports voice calls over the Internet
(Internet calls). Your device attempts emergency calls
primarily over cellular networks. If an emergency call
using cellular networks is not successful, then your
device attempts an emergency call through your
Internet call provider. Due to the established nature of
cellular telephony, you should use cellular networks for
emergency calls, if possible. If you have cellular network
coverage available, please make sure that your cellular
phone is switched on and ready to make calls before
32
you attempt an emergency call. The capability for an
members.
Options
Options PTT log.
>
Yes to log out and close the
emergency call using Internet telephony depends on
the availability of a WLAN network and your Internet
call provider's implementation of emergency call
capabilities. Contact your Internet call provider to check
the Internet telephony emergency call capability
>
VoIP (voice over Internet protocol) technology is a set
of protocols that facilitate phone calls over an IP
network, such as the Internet. VoIP phone calls can be
established between computers, between mobile
phones, and between a VoIP device and a traditional
telephone. To make or receive a VoIP call, your device
must be within WLAN coverage, for example.
Before you can make net calls, you need to create a net
telephone profile. When the profile is ready, you can
make a net call from all applications where you can
create a regular voice call. To make a net call in standby
mode to an address that does not start with a digit,
press any number key, then press # for a few seconds
to clear the display and to switch the device from
number mode to letter mode. Write the address and
press the call key. If you have the fold open, and you
have created a net telephone profile, write the address
and press the call key.
You must define session initiation protocols (SIP)
settings in Menu Tools
>
settings and VoIP settings in
Call and Menu Tools
>
Contact your service provider for more information and
correct settings.
Settings Connection
> > >
Menu Tools Settings
> >
Settings Call > Connection.
> >
SIP
>