Table of Contents
Advertisement
3. Activate Bluetooth in your other device, and select
Continue
in your Nokia E70 to start searching for
devices with active Bluetooth connectivity.
4. Select
Stop
in your Nokia E70 after it has found your
other device.
5. Select your other device from the list. You are asked
to enter a passcode (1 to 16 digits) on your Nokia
E70. The passcode is used only once to confirm this
connection.
6. Enter the code on your Nokia E70, and select OK.
Enter the passcode on your other device, and select
OK. The devices are now paired. See "Pair
devices," p. 60.
For some phone models, the
application is sent to your other device as a
message. To install
device, open the message, and follow the
instructions on the display.
7. From your Nokia E70, select the content you want
to transfer from your other device, and OK.
Infrared connectivity
1. In the information view, select Continue.
2. Select
Via
infrared. Both devices must support the
selected connection type.
3. Connect the two devices. See "Infrared," p. 62.
4. From your Nokia E70, select the content you want
to transfer from your other device, and OK.
Content is copied from the memory of the other device
to the corresponding location in your device. Copying
time depends on the amount of data to be transferred.
22
You can also cancel and continue later.
Transfer data
Transfer data
on your other
The necessary steps for data transfer may vary
depending on your device, and whether you have
interrupted data transfer earlier. The items that you can
transfer vary depending on the other device.
Synchronize data with another
device
If you have previously transferred data to your Nokia
E70, and your other device supports synchronization,
you can use
Transfer
to keep the data of the two devices
up to date.
1. Select Phones, and press the joystick.
2. Scroll to the device from which you transferred data,
and press the joystick.
3. Select Synchronise, and press the joystick. The
devices start synchronizing using the same
connection type that you selected when you
originally transferred data. Only the data that you
originally selected for data transfer is synchronized.
To modify the data transfer and synchronization
settings, select Synchronise, scroll to a device, press the
joystick, and select Edit.
Advertisement
Table of Contents
