Download Print this page

Shure UR1M Quick Start Manual page 3

Micro bodypack transmitter
Hide thumbs Also See for UR1M:

Advertisement

NiMH 1000 mAH:
Select Battery Type:
1. Set the micro bodypack transmitter switch to on.
2. Press enter key, then scroll using button to select battery type. Press enter key to confirm.
Note: For the most accurate battery metering and performance, make sure to select the correct battery type.
To open the micro bodypack transmitter, see illustrations below:
RF Carrier Frequency
Range
Working Range
RF Power Output
Power Requirements
Current Drain
Gain Adjustment Range
470-865, 944-952 MHz depending on region
150 m (500 ft.), under typical conditions
500 m(1600 ft.) line-of-sight, outdoors for a single system
Note: Actual working range depends on RF signal absorption, reflection and inter­
ference
Selectable 10 mW or 50 mW depending on region
Two 1.5V AAA alkaline, lithium primary, and NiMH batteries
130 mA max. at 3V (normal RF power setting)
200 mA max. at 3V (high RF power setting)
–20 to +35 dB
–10 dB: Recommended for guitars
6 hours (normal RF power)
4 hours (high RF power)
Shure Incorporated
3/7

Advertisement

loading