Using The Baby Monitor; Setting Up; Power On Or Off The Camera - Kodak C525P User Manual

3. USING THE BABY MONITOR

Please read these instructions carefully, and be aware that
this Baby Monitor is only intended as an aid.
It is not a substitute for responsible adult supervision.

3.1 Setting Up

• Make sure that the Camera and Parent Unit are
both switched on.
• Place the Camera in a convenient location (e.g. on
a table, mount on wall...etc) and point the camera
lens towards the area you want to monitor.
NOTE:
• Do not place the Camera within reach of a child
or baby! If there is interference with the picture or
sound, try moving the units to different locations,
and ensure that they are not close to any other
electrical equipment.
• If you place the Parent Unit and Camera too close
together, you may hear a high pitched noise. This is
certainly not a defect. As the units are designed to
be operated at some distance, so please move the
units further apart to avoid this noise.
• It is only recommended to use a Class 10 micro-SD
up to 32GB (Facing the camera, insert the micro-SD
card with the label towards you) and the file format
Page | 24

3.2 Power On or Off the Camera

• Slide the ON/OFF switch to the ON position to
switch on the Camera. The power indicator lights
up in blue.
• Slide the ON/OFF switch to the OFF position to
switch off the Camera. The power indicator goes
off if the battery is not being charged, or lights up
in red if it is charging.
Using the Baby Monitor