Kodak C525P User Manual page 21

4.3.3 Home Mode
Once Home Mode is enabled, the camera is disconnected
immediately from the Wi-Fi Router.
Home Mode enhances the Radio Frequency Connection
between the parent unit and the camera.
Also, puts your mind at rest if you have any security con-
cerns while monitoring your little ones.
Note
When switching from Router to Home Mode, the range
may be shorter depending on the setup as the camera
will be connecting directly to the parent unit.
When Home mode is active that the Kodak Smart Home
app usage scenarios will not work.
Page | 40
A) Enter Home Mode
1. Press " " on the Parent Unit for the menu bar.
2. Press " " or " " button until "
SETTING) is highlighted, and press "
proceed to confirm.
3. Press the " " button or "
" " is highlighted in the sub menu.
Press " " to apply.
B) Exit Home Mode
Note
To disable the Home Mode so that the user can access
the camera via the application, switch to Direct Mode first
then user can switch to Router mode later if need so.
1. Press " " on the Parent Unit for the menu bar.
2. Press " " or " " button until "
SETTING) is highlighted, and press "
proceed to confirm.
3. Press the " " button or "
" (Direct Mode) is highlighted in the sub menu.
Press " " to apply.
"(NETWORK
" to
" button until
"(NETWORK
" to
" button until "
Parent Unit Options Introduction